Wednesday, April 17, 2024
GuideTechnology

AirPods Not Connecting To Phone? – Some Easy Fixes

AirPods make our lives easy as these are reliable accessories that pair comfortably and connect automatically. But things get irritating when they do not work well. You have only a single button on the charging case, which leads to your failure in believing that you can fix the issue yourself. But that’s not actually true. Even one button can fix several problems. In this article, we’ll learn to solve why are my AirPods not connecting to my phone?

Reasons for AirPods not Connecting to iPhone

There may be several reasons for your AirPods not connecting:

  1. Device being out of range.
  2. AirPods are out of battery.
  3. Issue with your Phone’s Bluetooth.
  4. The software is not updated.
  5. Accidently connected your device to another output audio source.
  6. AirPods may need a repair.

Below we have given the various solutions to the issue of AirPods not connecting to phones.

Clean Your AirPods

To work well, AirPods need regular cleaning. But you have to be extra cautious with the liquid. Remember that AirPods of the 1st and the 2nd generations are not waterproof. Ensure that you don’t do damage while cleaning the dirt.

Below a few recommendations are mentioned on how to clean AirPods to fix only one AirPod functioning:

  1. Use a soft, lint-free, and slightly wet cloth to wipe AirPods clean.
  2. Ensure the AirPods are completely dry before putting them back into a charging case.
  3. Refrain from using sharp objects while removing dirt from your AirPods.

Update to the Right Version of iOS

If you’ve not experienced connecting the AirPods to your iPhone or iPad before, ensure that the device updates to the latest version. If you have first-generation AirPods, your iOS device must have iOS 10 or later. If you have the second-generation AirPods, you must be running at least iOS 12.2.

Follow the below steps to update your device to the latest version of iOS:

  1. First, open the “Settings” app on your iPad or iPhone.
  2. Then tap General and after that “Software Update”.
  3. Check which version of iOS you are running on the Software Update Page, and install an update if it’s required.

How to Check AirPod Battery

Follow these below simple steps to check the AirPod battery:

  1. First, go to your iPhone notification center and then go to the options.
  2. Now scroll down and go to the battery widget.
  3. Here you’ll find your AirPod’s battery level.

If you’ve installed Siri on your device, Siri will answer you with the level of battery when you send a voice command such as “AirPod Battery.”

How to Charge AirPod Battery

Nowadays, Apple technology has made it easier to charge a device. Follow these simple steps:

  1. You can charge your AirPods by setting them inside the charging case and then locking them.
  2. If the charging case is not charged, you can connect it to a USB-C, a USB lightning cable, or a wireless charging mat.

Check Your AirPod Connection

Follow a few simple steps to make your AirPods work efficiently and solve the problem of why are my AirPods not connecting to my phone:

  1. Ensure your AirPods are charged. To do that, place the AirPods in their case and then connect them to a USB power source for 1-2 hours.
  2. After connecting, make sure the Bluetooth icon is turned on. To check this, open the Control Panel by swiping down from the upper right corner of your screen or up from the bottom. The Bluetooth icon will get blue. You can also troubleshoot from the Bluetooth menu in your Settings app.
  3. Restart the iPhone or iPad you are trying to connect your AirPods. Quite often, you can resolve the issue by just restarting the device.

Try Reset your AirPods

You might require to reset your AirPods and pair them with your iPad or iPhone again if none of the above steps work.

  1. First unpair the AirPods from the iPad or iPhone. Start the Setting app and tap “Bluetooth” on your iPad or iPhone. Next, tap the “i” and then tap “Forget this Device”.
  2. Now put the AirPods in the case and close the lid. Open the lid after waiting for about 30 seconds.
  3. Press and hold the setup button located on the back of the case until the status light sparks amber a few times. A continuous flashing light follows.
  4. You will now be able to reconnect your AirPods and pair them with the device.
Read Also: How to unlock iPhone Passcode without Computer?

How to Connect Your AirPods with Mac

If you’re facing a problem getting your AirPods to connect to a Mac, the checking steps are essentially similar for the iPhone and iPad. Ensure that your computer is running the right version of iOS.

Original AirPods require macOS Sierra or later, and second-generation AirPods need macOS 10.14.4 or later. To troubleshoot your version of the macOS, select System Preferences from the Apple menu, and then click on “Software Update.” Click “Update Now” if there are any updates available.

If the operating system is OK, follow the below steps for the iPhone and iPad.

  1. Unpair the AirPods on your Mac. To do this process, hold the Alt Key while you click on the Bluetooth icon in the menu bar of the Mac.
  2. Click on the AirPods in the Devices section, and then click “Remove”. Click “Remove” once more to verify.
  3. Now place the AirPods in the case and close the lid. Open the lid after waiting for about 30 seconds.
  4. Press and hold the setup button located on the back of the case until the status light sparks amber a few times. A continuous flashing light follows.
  5. Now you’ll be able to reconnect your AirPods and pair them with the device.
Video Credits: Tech Insider

Wrap Up

Resolving AirPods connection issues is not that complicated. You don’t have to be an expert to fix AirPods connection errors and can find the solutions to the query why are my AirPods not connecting to my phone. It’s all in your hands because a simple tap on your screen could solve your problem. Comment below if you’ve any confusion or want to share your experiences with your AirPods.

Leave A Reply

Your email address will not be published. Required fields are marked *